RF CHOkes 560uh
Electronics Forum Index Electronics
Circuits, theory, electrons and discussions.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web ElectronicsHelp.net
RF CHOkes 560uh

 
Post new topic   Reply to topic    Electronics Forum Index -> Components
Author Message
spock
Guest
Posted: Sun Jan 16, 2005 5:49 pm    Post subject: RF CHOkes 560uh Reply with quote
Howdy folks
I have a problem I need to find at least 9off 560uh rf chokes about the
size of a 1/4 w resistor. Nobody I have tried has them, can somone help?

Thank Lee.

Back to top
Boris Mohar
Guest
Posted: Sun Jan 16, 2005 7:33 pm    Post subject: Re: RF CHOkes 560uh Reply with quote
On Sun, 16 Jan 2005 22:07:34 +1030, "spock" <ufp@optusnet.com.au> wrote:

Quote:
Howdy folks
I have a problem I need to find at least 9off 560uh rf chokes about the
size of a 1/4 w resistor. Nobody I have tried has them, can somone help?

Thank Lee.

What current carrying capacity? What maximum resistance can you tolerate?




Regards,

Boris Mohar

Got Knock? - see:
Viatrack Printed Circuit Designs (among other things) http://www.viatrack.ca

void _-void-_ in the obvious place
Back to top
spock
Guest
Posted: Sun Jan 16, 2005 8:33 pm    Post subject: Re: RF CHOkes 560uh Reply with quote
"Boris Mohar" <borism_-void-_@sympatico.ca> wrote in message
news:q7rku0peokavd2a8cbq85nc80178n2im1j@4ax.com...
Quote:
On Sun, 16 Jan 2005 22:07:34 +1030, "spock" <ufp@optusnet.com.au> wrote:

Howdy folks
I have a problem I need to find at least 9off 560uh rf chokes about the
size of a 1/4 w resistor. Nobody I have tried has them, can somone help?

Thank Lee.

What current carrying capacity? What maximum resistance can you tolerate?
less than 100ma as for maximum resistance its only driving a reed switch so

I am uncertain.

Back to top
Guest
Posted: Mon Jan 17, 2005 8:07 am    Post subject: Re: RF CHOkes 560uh Reply with quote
spock wrote:

Quote:
Howdy folks
I have a problem I need to find at least 9off 560uh rf chokes about the
size of a 1/4 w resistor. Nobody I have tried has them, can somone help?

Thank Lee.




Mouser Part # 43LS564

http://www.mouser.com/catalog/specsheets/114301.pdf
Back to top
Boris Mohar
Guest
Posted: Mon Jan 17, 2005 8:52 am    Post subject: Re: RF CHOkes 560uh Reply with quote
On Mon, 17 Jan 2005 02:07:48 GMT, ehsjr@bellatlantic.net wrote:

Quote:
spock wrote:

Howdy folks
I have a problem I need to find at least 9off 560uh rf chokes about the
size of a 1/4 w resistor. Nobody I have tried has them, can somone help?

Thank Lee.




Mouser Part # 43LS564
http://www.mouser.com/catalog/specsheets/114301.pdf

How is he going to cram a reed relay through that? I thought that Spock was
looking for a hollow bodied coil to drive a reed relay with.

--

Boris Mohar
Back to top
Ross Herbert
Guest
Posted: Mon Jan 17, 2005 9:58 am    Post subject: Re: RF CHOkes 560uh Reply with quote
On Sun, 16 Jan 2005 21:52:19 -0500, Boris Mohar
<borism_-void-_@sympatico.ca> wrote:

Quote:
On Mon, 17 Jan 2005 02:07:48 GMT, ehsjr@bellatlantic.net wrote:

spock wrote:

Howdy folks
I have a problem I need to find at least 9off 560uh rf chokes about the
size of a 1/4 w resistor. Nobody I have tried has them, can somone help?

Thank Lee.




Mouser Part # 43LS564
http://www.mouser.com/catalog/specsheets/114301.pdf

How is he going to cram a reed relay through that? I thought that Spock was
looking for a hollow bodied coil to drive a reed relay with.


Boris, if your assumption is correct one might ask "how does the OP
intend to cram a reed contact through a rf choke the size of a 1/4
watt resistor?" Surely he is not that optimistic?

If the OP was trying to find a "reed operating coil" I hardly think he
would have specified an "rf choke the size of a 1/4 watt resistor". My
reading of his request is that he is just looking for an rf
suppression choke to connect in series with the reed operating coil.
Back to top
Boris Mohar
Guest
Posted: Mon Jan 17, 2005 5:16 pm    Post subject: Re: RF CHOkes 560uh Reply with quote
On Mon, 17 Jan 2005 03:58:00 GMT, Ross Herbert <rherber1@bigpond.net.au>
wrote:

Quote:
On Sun, 16 Jan 2005 21:52:19 -0500, Boris Mohar
borism_-void-_@sympatico.ca> wrote:

On Mon, 17 Jan 2005 02:07:48 GMT, ehsjr@bellatlantic.net wrote:

spock wrote:

Howdy folks
I have a problem I need to find at least 9off 560uh rf chokes about the
size of a 1/4 w resistor. Nobody I have tried has them, can somone help?

Thank Lee.




Mouser Part # 43LS564
http://www.mouser.com/catalog/specsheets/114301.pdf

How is he going to cram a reed relay through that? I thought that Spock was
looking for a hollow bodied coil to drive a reed relay with.


Boris, if your assumption is correct one might ask "how does the OP
intend to cram a reed contact through a rf choke the size of a 1/4
watt resistor?" Surely he is not that optimistic?

If the OP was trying to find a "reed operating coil" I hardly think he
would have specified an "rf choke the size of a 1/4 watt resistor". My
reading of his request is that he is just looking for an rf
suppression choke to connect in series with the reed operating coil.

H also said "its only driving a reed switch.."
--
Back to top
spock
Guest
Posted: Mon Jan 17, 2005 9:19 pm    Post subject: Re: RF CHOkes 560uh Reply with quote
Yes I am looking for a rf choke the size of a 1/4 watt resistor, to more
precise I looking for 9 chokes.
They used in series with a Darlington transistor collector and is driving a
reed switch. I need these to repair a control board for a PLL. I hope this
clears that up.
"Ross Herbert" <rherber1@bigpond.net.au> wrote in message
news:0edmu0dkkrhmi3m4r8n201hnpfl93k0oph@4ax.com...
Quote:
On Sun, 16 Jan 2005 21:52:19 -0500, Boris Mohar
borism_-void-_@sympatico.ca> wrote:

On Mon, 17 Jan 2005 02:07:48 GMT, ehsjr@bellatlantic.net wrote:

spock wrote:

Howdy folks
I have a problem I need to find at least 9off 560uh rf chokes about
the
size of a 1/4 w resistor. Nobody I have tried has them, can somone help?

Thank Lee.




Mouser Part # 43LS564
http://www.mouser.com/catalog/specsheets/114301.pdf

How is he going to cram a reed relay through that? I thought that Spock
was
looking for a hollow bodied coil to drive a reed relay with.


Boris, if your assumption is correct one might ask "how does the OP
intend to cram a reed contact through a rf choke the size of a 1/4
watt resistor?" Surely he is not that optimistic?

If the OP was trying to find a "reed operating coil" I hardly think he
would have specified an "rf choke the size of a 1/4 watt resistor". My
reading of his request is that he is just looking for an rf
suppression choke to connect in series with the reed operating coil.
Back to top
Boris Mohar
Guest
Posted: Mon Jan 17, 2005 11:28 pm    Post subject: Re: RF CHOkes 560uh Reply with quote
On Tue, 18 Jan 2005 01:37:22 +1030, "spock" <ufp@optusnet.com.au> wrote:

Quote:
Yes I am looking for a rf choke the size of a 1/4 watt resistor, to more
precise I looking for 9 chokes.
They used in series with a Darlington transistor collector and is driving a
reed switch. I need these to repair a control board for a PLL. I hope this
clears that up.

Never seen that. What is the purpose of the choke? Do you have a flyback
diode across the reed coil?

--

Boris Mohar
Back to top
Jamie
Guest
Posted: Tue Jan 18, 2005 4:26 am    Post subject: Re: RF CHOkes 560uh Reply with quote
Boris Mohar wrote:

Quote:
On Tue, 18 Jan 2005 01:37:22 +1030, "spock" <ufp@optusnet.com.au> wrote:


Yes I am looking for a rf choke the size of a 1/4 watt resistor, to more
precise I looking for 9 chokes.
They used in series with a Darlington transistor collector and is driving a
reed switch. I need these to repair a control board for a PLL. I hope this
clears that up.


Never seen that. What is the purpose of the choke? Do you have a flyback
diode across the reed coil?

--

Boris Mohar


i have seen that before, a choke used in series to the coil of a reed

relay when passing R.F. through the contacts of the reed.
the coil around the read is acting like a transformation effect of
EMF.
Back to top
Guest
Posted: Wed Jan 26, 2005 10:42 am    Post subject: Re: RF CHOkes 560uh Reply with quote
spock wrote:

Quote:
Yes I am looking for a rf choke the size of a 1/4 watt resistor, to more
precise I looking for 9 chokes.
They used in series with a Darlington transistor collector and is driving a
reed switch. I need these to repair a control board for a PLL. I hope this
clears that up.
"Ross Herbert" <rherber1@bigpond.net.au> wrote in message
news:0edmu0dkkrhmi3m4r8n201hnpfl93k0oph@4ax.com...


On Sun, 16 Jan 2005 21:52:19 -0500, Boris Mohar
borism_-void-_@sympatico.ca> wrote:



On Mon, 17 Jan 2005 02:07:48 GMT, ehsjr@bellatlantic.net wrote:



spock wrote:



Howdy folks
I have a problem I need to find at least 9off 560uh rf chokes about
the
size of a 1/4 w resistor. Nobody I have tried has them, can somone help?

Thank Lee.






Mouser Part # 43LS564
http://www.mouser.com/catalog/specsheets/114301.pdf


How is he going to cram a reed relay through that? I thought that Spock
was
looking for a hollow bodied coil to drive a reed relay with.


Boris, if your assumption is correct one might ask "how does the OP
intend to cram a reed contact through a rf choke the size of a 1/4
watt resistor?" Surely he is not that optimistic?

If the OP was trying to find a "reed operating coil" I hardly think he
would have specified an "rf choke the size of a 1/4 watt resistor". My
reading of his request is that he is just looking for an rf
suppression choke to connect in series with the reed operating coil.






So, will the part I posted work for you?

It seems to have been lost in the debate
about craming a reed switch through the
size of a 1/4 watt resistor.
Back to top
 
Post new topic   Reply to topic    Electronics Forum Index -> Components All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Home & Living New Topics
Powered by phpBB