Efficiency of Transformer
Electronics Forum Index Electronics
Circuits, theory, electrons and discussions.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web ElectronicsHelp.net
Efficiency of Transformer

 
Post new topic   Reply to topic    Electronics Forum Index -> Basics
Author Message
Guest
Posted: Mon Feb 28, 2005 9:00 pm    Post subject: Efficiency of Transformer Reply with quote
I am currently attempting a project on the efficiency of a transformer.
As I am using low voltage and current inputs I am recieving low
efficiency level eg. below 15% I am wondering if this is normal and
possible solutions to the problem. Any good website's on transformers
and their efficiency.

Cheers

Back to top
Andrew Holme
Guest
Posted: Mon Feb 28, 2005 9:54 pm    Post subject: Re: Efficiency of Transformer Reply with quote
charles.macleod@gmail.com wrote:
Quote:
I am currently attempting a project on the efficiency of a
transformer.
As I am using low voltage and current inputs I am recieving low
efficiency level eg. below 15% I am wondering if this is normal and
possible solutions to the problem. Any good website's on transformers
and their efficiency.

What frequency? What power level? Please describe your test circuit.
How are you measuring efficiency?
Back to top
John Popelish
Guest
Posted: Mon Feb 28, 2005 9:54 pm    Post subject: Re: Efficiency of Transformer Reply with quote
charles.macleod@gmail.com wrote:
Quote:

I am currently attempting a project on the efficiency of a transformer.
As I am using low voltage and current inputs I am recieving low
efficiency level eg. below 15% I am wondering if this is normal and
possible solutions to the problem. Any good website's on transformers
and their efficiency.

Cheers

What frequency and power level are we talking about? Very different
problems at 60 Hz than at 10 MHz.

--
John Popelish

Back to top
Jamie
Guest
Posted: Tue Mar 01, 2005 1:28 am    Post subject: Re: Efficiency of Transformer Reply with quote
charles.macleod@gmail.com wrote:

Quote:
I am currently attempting a project on the efficiency of a transformer.
As I am using low voltage and current inputs I am recieving low
efficiency level eg. below 15% I am wondering if this is normal and
possible solutions to the problem. Any good website's on transformers
and their efficiency.

Cheers

thats a wind open area.

the first problem to be concerned about is the
DC resistance in the primary and secondary windings.
the primary winding dc resistance can be scaled to the
secondary windings in the same manner as the voltage
is scaled.
for example, if you had lets say 30 ohms of DC resistance
on the primary and the ratio was 10:1, for a rough guess
you could assume that you will have an effective resistor
drop in the secondary load circuit of 3 ohms.
then talking into account the Dc resistance in the
secondary winding compounds the problem.
then you have the saturation problem of the transformer
that also plays a roll in the efficiency along with the way
its would on each other, capacitance built up, core type etc.

if you need a nice PDF to look at here you go.
http://www.midcom-inc.com/pdf/TN69.pdf

and if your bored
http://eccentrix.com/members/jfcole/water_transformer.htm
Back to top
Guest
Posted: Tue Mar 01, 2005 4:14 am    Post subject: Re: Efficiency of Transformer Reply with quote
I think charles is using a 12 volt ac signal, with a current of 10mA i
dont know the frequency he is using

roy
Back to top
roy davidson
Guest
Posted: Tue Mar 01, 2005 5:14 am    Post subject: Re: Efficiency of Transformer Reply with quote
I think charles is using a 12 volt ac signal, with a current of 10mA i
dont know the frequency he is using


roy
Back to top
Guest
Posted: Tue Mar 01, 2005 9:11 pm    Post subject: Re: Efficiency of Transformer Reply with quote
Hi I am using a 12v supply and a frequecy of 5KHz

I am using formula current*voltage*cosθ/2 for power at input

Using P=IV at output

Cheers
Back to top
Jamie
Guest
Posted: Wed Mar 02, 2005 1:03 am    Post subject: Re: Efficiency of Transformer Reply with quote
charles.macleod@gmail.com wrote:
Quote:
Hi I am using a 12v supply and a frequecy of 5KHz

I am using formula current*voltage*cosθ/2 for power at input

Using P=IV at output

Cheers

i don't remember dividing the angle by 2?


P= I*V*cos(PhaseAngle);

or am i missing something here?
Back to top
 
Post new topic   Reply to topic    Electronics Forum Index -> Basics All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Home & Living New Topics
Contact Us
Powered by phpBB