SMPS controller - how does it get its own start up power??
Electronics Forum Index Electronics
Circuits, theory, electrons and discussions.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web ElectronicsHelp.net
SMPS controller - how does it get its own start up power??

 
Post new topic   Reply to topic    Electronics Forum Index -> Electronics General
Author Message
siliconmike
Guest





Posted: Tue Dec 06, 2005 1:35 am    Post subject: SMPS controller - how does it get its own start up power?? Reply with quote

I figured that an SMPS controller IC receives power from one of the
windings on the transformer core. The controller then uses PWM to
switch the primary winding.

But then how does the controller IC receive a kick startup power in the
first place (since the PWM switching has not yet begun and the FET
switch is off yet) ?

Please explain.

Mike

Back to top
petrus bitbyter
Guest





Posted: Tue Dec 06, 2005 1:36 am    Post subject: Re: SMPS controller - how does it get its own start up power Reply with quote

Mike,

Initial power is provided by a boot circuit, usually an R from the
unregulated input and a C between Vcc and GND. The PMW starts using litle
power. Once it has started, the transformer coil has to take over as the
chip rapidly switches to full operation and needs much more power. When the
take over failes, the chip switches off but, unless precautions are taken,
it tries to start again almost immediately. Thats the wellknown tic.. tic..
tic.. you hear from defective equipment. Try to find datasheets of the
UC3842 and his family. At least one of them describes the boot proces. Some
other information also can be found in Philips Application Note AN1274.

petrus bitbyter
Back to top
Zak
Guest





Posted: Fri Dec 09, 2005 1:35 am    Post subject: Re: SMPS controller - how does it get its own start up power Reply with quote

petrus bitbyter wrote:

Quote:
Initial power is provided by a boot circuit, usually an R from the
unregulated input and a C between Vcc and GND. The PMW starts using litle
power. Once it has started, the transformer coil has to take over as the
chip rapidly switches to full operation and needs much more power.

PC power supplies may use a self-oscillating converter. The control of
this is taken over by the chip as soon as output voltages appear.

http://www.qsl.net/xq2fod/Electron/PS40/PS40.html


Thomas

Back to top
 
Post new topic   Reply to topic    Electronics Forum Index -> Electronics General All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Home & Living New Topics
Contact Us
Powered by phpBB