What can happen if a Wall Adapter Fails?
Electronics Forum Index Electronics
Circuits, theory, electrons and discussions.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web ElectronicsHelp.net
What can happen if a Wall Adapter Fails?

 
Post new topic   Reply to topic    Electronics Forum Index -> Basics
Author Message
royalmp2001
Guest
Posted: Wed Feb 16, 2005 9:26 pm    Post subject: What can happen if a Wall Adapter Fails? Reply with quote
For safety reasons, I need to know what are the REALISTIC chances of
120V appearing at the output of a failed basic 12V wall adapter.

I would have thought most likely the secondary or primary winding would
most likely go open-circuit, or the smoothing electrolytic cap or
bridge rectifier go open or short circuit....so I'm hoping that at
worst you get 0V at the output.

Can someone tell me the chances of a dangerous situation occuring.
What safeguard could I incorporate? Would a GFCI protector do the job?
Could I build a discreet GFCI into my circuit? Any ideas?

I intend to produce a commercial project powered with a wall adapter
that connects upto the human body.

Thanks

Back to top
Rich Grise
Guest
Posted: Wed Feb 16, 2005 11:10 pm    Post subject: Re: What can happen if a Wall Adapter Fails? Reply with quote
On Wed, 16 Feb 2005 07:26:04 -0800, royalmp2001 wrote:

Quote:
For safety reasons, I need to know what are the REALISTIC chances of
120V appearing at the output of a failed basic 12V wall adapter.

I would have thought most likely the secondary or primary winding would
most likely go open-circuit, or the smoothing electrolytic cap or
bridge rectifier go open or short circuit....so I'm hoping that at
worst you get 0V at the output.

Can someone tell me the chances of a dangerous situation occuring.
What safeguard could I incorporate? Would a GFCI protector do the job?
Could I build a discreet GFCI into my circuit? Any ideas?

I intend to produce a commercial project powered with a wall adapter
that connects upto the human body.

If I do your research for you, do I get paid commensurately?


Thanks,
Rich
Back to top
Lord Garth
Guest
Posted: Thu Feb 17, 2005 3:04 am    Post subject: Re: What can happen if a Wall Adapter Fails? Reply with quote
"royalmp2001" <royalmp2001@hotpop.com> wrote in message
news:1108567564.629415.104940@z14g2000cwz.googlegroups.com...
Quote:
For safety reasons, I need to know what are the REALISTIC chances of
120V appearing at the output of a failed basic 12V wall adapter.

I would have thought most likely the secondary or primary winding would
most likely go open-circuit, or the smoothing electrolytic cap or
bridge rectifier go open or short circuit....so I'm hoping that at
worst you get 0V at the output.

Can someone tell me the chances of a dangerous situation occuring.
What safeguard could I incorporate? Would a GFCI protector do the job?
Could I build a discreet GFCI into my circuit? Any ideas?

I intend to produce a commercial project powered with a wall adapter
that connects upto the human body.

Thanks


Years ago, the phone company supplied some AC output wall warts to run
the dial lights in certain models of their phones. A recall occured because
these molded wall warts were, in some cases, overheating and becoming
potential fire starters.

Back to top
dB
Guest
Posted: Thu Feb 17, 2005 3:53 am    Post subject: Re: What can happen if a Wall Adapter Fails? Reply with quote
"royalmp2001" <royalmp2001@hotpop.com> wrote in message news:<1108567564.629415.104940@z14g2000cwz.googlegroups.com>...
Quote:
For safety reasons, I need to know what are the REALISTIC chances of
120V appearing at the output of a failed basic 12V wall adapter.

I would have thought most likely the secondary or primary winding would
most likely go open-circuit, or the smoothing electrolytic cap or
bridge rectifier go open or short circuit....so I'm hoping that at
worst you get 0V at the output.

Can someone tell me the chances of a dangerous situation occuring.
What safeguard could I incorporate? Would a GFCI protector do the job?
Could I build a discreet GFCI into my circuit? Any ideas?

I intend to produce a commercial project powered with a wall adapter
that connects upto the human body.

Thanks



The regulations applicable to mains powered equipment for medical use
are very stringent, at least in the U.K.
Check your local regulations.
I doubt very much that an ordinary wall adapter would meet the
requirements.
Back to top
 
Post new topic   Reply to topic    Electronics Forum Index -> Basics All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Home & Living New Topics
Contact Us
Powered by phpBB