Crystal problem..
Electronics Forum Index Electronics
Circuits, theory, electrons and discussions.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web ElectronicsHelp.net
Crystal problem..

 
Post new topic   Reply to topic    Electronics Forum Index -> Basics
Author Message
Shekhar
Guest





Posted: Sun Feb 06, 2005 5:56 pm    Post subject: Crystal problem.. Reply with quote

Hi all,
I have a RALTRON make 32.768KHz crystal connected to a processor working
on 5V logic. I can measure on a Osc correct freq. But when I connect the
same crystal to a processor working on 3.3V logic, I can see oscillations
at 200mV only on the oscilloscope. I have checked min voltage required for
the crystal which is OK..
CAn someone let me know as to what must be the problem ?

Back to top
Andrew Holme
Guest





Posted: Sun Feb 06, 2005 6:15 pm    Post subject: Re: Crystal problem.. Reply with quote

Shekhar wrote:
Quote:
Hi all,
I have a RALTRON make 32.768KHz crystal connected to a processor
working on 5V logic. I can measure on a Osc correct freq. But when I
connect the same crystal to a processor working on 3.3V logic, I can
see oscillations at 200mV only on the oscilloscope. I have checked
min voltage required for the crystal which is OK..
CAn someone let me know as to what must be the problem ?

Do you have the same loading capacitors in both circuits?
Back to top
ILYA
Guest





Posted: Thu Feb 10, 2005 10:13 pm    Post subject: Re: Crystal problem.. Reply with quote

Andrew Holme wrote:
Quote:
Shekhar wrote:

Hi all,
I have a RALTRON make 32.768KHz crystal connected to a processor
working on 5V logic. I can measure on a Osc correct freq. But when I
connect the same crystal to a processor working on 3.3V logic, I can
see oscillations at 200mV only on the oscilloscope. I have checked
min voltage required for the crystal which is OK..
CAn someone let me know as to what must be the problem ?


Do you have the same loading capacitors in both circuits?

IMHO loading capacitors need for choosing work harmonic of crystal.

check oscilloscope, it must have high input impedance to except damping
of oscillation...

check wires, it must be short to except parasite inductive current...

check startup circuit in chip or external...

---
if all work then all ok.

Back to top
 
Post new topic   Reply to topic    Electronics Forum Index -> Basics All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Home & Living New Topics
Contact Us
Powered by phpBB