Stein-Olav Lund
Guest
|
 Posted:
Wed Feb 09, 2005 5:32 pm Post subject:
Problems with Hitachi H2570 LCD module |
|
|
I have some problems with a newer version of the H2570 display. The old
one was defective, but when I tried an identical LCD in known good
order, the display is OK, so rest of the system seems to be working.
The boards are different, the old one has one OKI M5259 IC, the new one
has one Hitachi HD44100H. The other IC is HD44780A00 on both modules.
The boards also have different layouts, but has identical bus connector
and are supposed to be compatible.
The original board is marked 97-44145-9, the newer is marked 44027-9.
Has anyone good advice on how to make this newer board function?
Please reply to stein@iet.hist.no
|
|
Franc Zabkar
Guest
|
| Posted:
Thu Feb 10, 2005 3:07 am Post subject:
Re: Problems with Hitachi H2570 LCD module |
|
|
On Wed, 09 Feb 2005 12:32:43 +0100, Stein-Olav Lund
<stein.o.lund@iet.hist.no> put finger to keyboard and composed:
| Quote: | I have some problems with a newer version of the H2570 display. The old
one was defective, but when I tried an identical LCD in known good
order, the display is OK, so rest of the system seems to be working.
The boards are different, the old one has one OKI M5259 IC, the new one
has one Hitachi HD44100H. The other IC is HD44780A00 on both modules.
The boards also have different layouts, but has identical bus connector
and are supposed to be compatible.
The original board is marked 97-44145-9, the newer is marked 44027-9.
Has anyone good advice on how to make this newer board function?
Please reply to stein@iet.hist.no
|
The supply pins (+5V and ground) are sometimes reversed on these
"compatible" modules. Also, the contrast adjustment schemes vary. The
interface timing may also be different.
- Franc Zabkar
--
Please remove one 's' from my address when replying by email. |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in