canon copier problem
Electronics Forum Index Electronics
Circuits, theory, electrons and discussions.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web ElectronicsHelp.net
canon copier problem

 
Post new topic   Reply to topic    Electronics Forum Index -> Repair
Author Message
Luddite
Guest
Posted: Mon Feb 07, 2005 2:52 am    Post subject: canon copier problem Reply with quote
I have the pc-3 and its worked well till lately,the sliding glass carriage
on top moves freely in one direction but binds the other way unless its
been in a 75 degree room for a while. what type of lube is used on the
white gears? I dont see any,or what else could be causing this.

Back to top
k_teppo
Guest
Posted: Thu Feb 10, 2005 6:49 am    Post subject: Re: canon copier problem Reply with quote
Luddite <a2k@ripco.com> wrote in message news:<cu6l5k$joh$1@e250.ripco.com>...
Quote:
I have the pc-3 and its worked well till lately,the sliding glass carriage
on top moves freely in one direction but binds the other way unless its
been in a 75 degree room for a while. what type of lube is used on the
white gears? I dont see any,or what else could be causing this.

Use a silicone-based lubricant or moly grease. Don't use
petrochemical-based lubricants on plastic gears, as the gears will
soften and become damaged.

-k
Back to top
 
Post new topic   Reply to topic    Electronics Forum Index -> Repair All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Home & Living New Topics
Contact Us
Powered by phpBB