barrygordon
Joined: 14 Jan 2007
Posts: 1
|
Posted:
Sun Jan 14, 2007 2:40 pm Post subject:
unknown Voltage regulater |
|
|
I have a PCB that has a bad, what I believe to be, secondary voltage regulater. It is a SMT part about 1/4" to 1/2" square with 4 "pins" on one side and 1 wide "pin" on the other. The board has three of them and the one that should put out about 1.5V puts out .88. The only nomenclature on the device are two rows of 4 letters. The top row says "06AB" or "0GAB" and the bottom row says "LBRB". The printing is very small, badly faded and very difficult to read.
I would appreciate any help in identifying this part (the other two devices have output voltages of 2.5 and 1. and locating a source.
|
|