acceleration circuit?
Electronics Forum Index Electronics
Circuits, theory, electrons and discussions.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web ElectronicsHelp.net
acceleration circuit?

 
Post new topic   Reply to topic    Electronics Forum Index -> Design
Author Message
George Price
Guest





Posted: Sat Feb 19, 2005 3:51 am    Post subject: acceleration circuit? Reply with quote

I own an RC tank that has a simple on / off motor control. When you move
the joystick forward or reverse it jumps forward at full speed. Is there a
way to have motors gradually accelerate to it's top end and then decelerate
when the joystick is zeroed?

Back to top
Rene Tschaggelar
Guest





Posted: Sat Feb 19, 2005 3:57 am    Post subject: Re: acceleration circuit? Reply with quote

George Price wrote:

Quote:
I own an RC tank that has a simple on / off motor control. When you move
the joystick forward or reverse it jumps forward at full speed. Is there a
way to have motors gradually accelerate to it's top end and then decelerate
when the joystick is zeroed?

Sure. With a switchmode power controller. That should be
available as optional item at your preferred shop.

Rene
--
Ing.Buero R.Tschaggelar - http://www.ibrtses.com
& commercial newsgroups - http://www.talkto.net
Back to top
John Woodgate
Guest





Posted: Sat Feb 19, 2005 4:09 am    Post subject: Re: acceleration circuit? Reply with quote

I read in sci.electronics.design that George Price
<gprice7418@wowway.com> wrote (in <kdOdnRzgbcrb_ovfRVn-
pg@wideopenwest.com>) about 'acceleration circuit?', on Fri, 18 Feb
2005:
Quote:
I own an RC tank that has a simple on / off motor control. When you move
the joystick forward or reverse it jumps forward at full speed. Is there a
way to have motors gradually accelerate to it's top end and then decelerate
when the joystick is zeroed?


Yes, but it's not all that easy. You need pulse-width modulation motor

speed control, with automatic pulse-width variation. The problem is to
make the control circuit losses very low, otherwise the top speed will
emulate a WW One tank.
--
Regards, John Woodgate, OOO - Own Opinions Only.
The good news is that nothing is compulsory.
The bad news is that everything is prohibited.
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk

Back to top
Don Lancaster
Guest





Posted: Sat Feb 19, 2005 5:12 am    Post subject: Re: acceleration circuit? Reply with quote

John Woodgate wrote:
Quote:
I read in sci.electronics.design that George Price
gprice7418@wowway.com> wrote (in <kdOdnRzgbcrb_ovfRVn-
pg@wideopenwest.com>) about 'acceleration circuit?', on Fri, 18 Feb
2005:

I own an RC tank that has a simple on / off motor control. When you move
the joystick forward or reverse it jumps forward at full speed. Is there a
way to have motors gradually accelerate to it's top end and then decelerate
when the joystick is zeroed?



Yes, but it's not all that easy. You need pulse-width modulation motor
speed control, with automatic pulse-width variation. The problem is to
make the control circuit losses very low, otherwise the top speed will
emulate a WW One tank.


This is ----> a lot <--- messier than it sounds.
The model rr folks solved it decades ago.

You need a pulse on a ramp or its PWM equivalent to overcome stiction.

You want it to lurch at a carefully controlled rate.

BASIC STAMP should do it.

--
Many thanks,

Don Lancaster
Synergetics 3860 West First Street Box 809 Thatcher, AZ 85552
voice: (928)428-4073 email: don@tinaja.com

Please visit my GURU's LAIR web site at http://www.tinaja.com
Back to top
Rich Grise
Guest





Posted: Sat Feb 19, 2005 6:10 am    Post subject: Re: acceleration circuit? Reply with quote

On Fri, 18 Feb 2005 16:51:03 -0500, George Price wrote:

Quote:
I own an RC tank that has a simple on / off motor control. When you move
the joystick forward or reverse it jumps forward at full speed. Is there a
way to have motors gradually accelerate to it's top end and then decelerate
when the joystick is zeroed?


Check in rec.models.rc.* (there's a bunch of models.rc. groups.) Radio
Control sets have been doing this for years. You get a thing that plugs
in where a servo plugs in, called a "motor controller". It does exactly
what you describe.

You can buy it cheaper than you can build it.

Good Luck!
Rich
Back to top
 
Post new topic   Reply to topic    Electronics Forum Index -> Design All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Home & Living New Topics
Contact Us
Powered by phpBB