Philips Color
Electronics Forum Index Electronics
Circuits, theory, electrons and discussions.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web ElectronicsHelp.net
Philips Color

 
Post new topic   Reply to topic    Electronics Forum Index -> Repair
Author Message
Vince
Guest
Posted: Sun Feb 13, 2005 10:59 pm    Post subject: Philips Color Reply with quote
Hi!
I have a Philips 25F800 7583 that has a yoke that sounds like water boiling
and it gets real loud after it is on for a while. Anyone have any ideads?
Thank you,
Vince.

Back to top
Guest
Posted: Mon Feb 14, 2005 2:51 am    Post subject: Re: Philips Color Reply with quote
Replace the yoke.
The other attempt is to pull the yoke out of the set, make sure you
mark exactly where it was in the set (not on the yoke). Get the
electronics grade laquer and completely dip the yoke in the laquer, let
i soak in the laquer for an hour or so (but not the leads and connector
that goes into the board), let it dry a few days (or weeks) and repeat
the process.

Silicone generally does not get into all the internal structures enough
to dry in place.
Back to top
billyjones
Guest
Posted: Mon Feb 14, 2005 5:58 am    Post subject: Re: Philips Color Reply with quote
try http://fletchersite.com/ask.html

Back to top
 
Post new topic   Reply to topic    Electronics Forum Index -> Repair All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Home & Living New Topics
Contact Us
Powered by phpBB