| Author |
Message |
Bob in PHX
Guest
|
 Posted:
Tue Feb 08, 2005 8:41 am Post subject:
zenith avi tv issues |
|
|
To All,
My Zenith 27 inch avi tv is exhibiting the following symptoms
#1 the red gun seems to fail every now and then, causing all colors to be
green ...This happens at startup and does not clear, unless the tv is turned
off for a number of hours... Power cycling does not fix it.
#2 If you were to divide the screen into fourths (horizontal bands) the
second from the top band goes all fuzzy when the brightness is turned up,
but only on white or sky shots... with the brightness turned down, it works
fine....
Any ideas??????
I friend of mine suggested that Zenith made some really crap CRTs from the
late 80's till the late 90's and suggested that a CRT rejuvenator might fix
the issues. I have an appointment setup with a buddy who has a
rejuvenator.... we will see if that helps... in the mean time,,, any other
ideas...
Bob in phx
|
|
| Back to top |
|
 |
RonKZ650@aol.com
Guest
|
| Posted:
Tue Feb 08, 2005 9:07 pm Post subject:
Re: zenith avi tv issues |
|
|
#1. Bad solder connections on the 3 video output transistors on the CRT
board.
#2. Bad picture tube.
Both very common on this Zenith TV unfortunately. |
|
| Back to top |
|
|
Bob in PHX
Guest
|
| Posted:
Sat Feb 12, 2005 6:11 am Post subject:
Re: zenith avi tv issues |
|
|
ok, its fixed, but I did more then one thing to fix it...
1. removed back and took off crt card. I found some discoloration around the
three color gun resistors. I resoldered all three resistors.
2. found some weak/dry soldering on the large color gun transistors on the
same board. Resoldered these connections
3. gave the crt tube pins a shot of pro gold / deoxit. replaced the board.
I then cranked the old girl up and look no more green tint to everything.
But the 1/2 to 3/4 horizontal band was still fuzzy. I looked closer and
decided that maybe a tweet of the focus on the flyback was in order.... Well
that was all it took. No more green and perfect picture!!!!!!!!!!!!!!!!!!!
Now to lift it back to on top of the file cabinet in my office, of course, I
had to buy the 4 drawer cabinet,,,, didnt I......
Bob in phx
<RonKZ650@aol.com> wrote in message
news:1107875224.085311.149860@z14g2000cwz.googlegroups.com...
| Quote: | #1. Bad solder connections on the 3 video output transistors on the CRT
board.
#2. Bad picture tube.
Both very common on this Zenith TV unfortunately.
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in