| Author |
Message |
seattle dave
Guest
|
 Posted:
Sun May 08, 2005 12:35 am Post subject:
how can I cause static on a phone line? |
|
|
I want to cause static or interference on a line that leads from
the wall to a callmaster IV made by Lucent. These are phones used in
call-centers... The line has eight wires and I think it is the same as
a computer data line?? There is no other power source to the Lucent
callmaster, so one of the wires must carry power. The wires are all
small however... It is the same cord as is attached to a computer modem
to a computer....
thanks for any help on this...
would a strong radio signal interfer??
|
|
| Back to top |
|
 |
CJT
Guest
|
| Posted:
Sun May 08, 2005 8:35 am Post subject:
Re: how can I cause static on a phone line? |
|
|
seattle dave wrote:
| Quote: | I want to cause static or interference on a line that leads from
the wall to a callmaster IV made by Lucent. These are phones used in
call-centers... The line has eight wires and I think it is the same as
a computer data line?? There is no other power source to the Lucent
callmaster, so one of the wires must carry power. The wires are all
small however... It is the same cord as is attached to a computer modem
to a computer....
thanks for any help on this...
would a strong radio signal interfer??
You might want to review applicable law first. |
--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form che...@prodigy.net. |
|
| Back to top |
|
|
teletech
Guest
|
| Posted:
Thu May 12, 2005 12:35 am Post subject:
Re: how can I cause static on a phone line? |
|
|
After you review the applicable laws, you could learn alot here.
http://www.textfiles.com/phreak/BOXES/
Look for the Noise colored box.
|
|
| Back to top |
|
|
Dr. Anton T. Squeegee
Guest
|
| Posted:
Sat May 14, 2005 4:35 pm Post subject:
Re: how can I cause static on a phone line? |
|
|
In article <1115509612.552450.80070@z14g2000cwz.googlegroups.com>,
seattlemanila@comcast.net says...
| Quote: | I want to cause static or interference on a line that leads from
the wall to a callmaster IV made by Lucent. These are phones used in
call-centers... The line has eight wires and I think it is the same as
|
(1) Locate a Tesla coil and a galvanized tub filled with warm salt
water.
(2) Step into tub, take firm hold of the output end of the Tesla
coil with one hand.
(3) Flip coil power switch to 'On' with your free hand.
This should provide a great deal of static. However, I don't think
much of it would leak into the phone lines.
--
Dr. Anton T. Squeegee, Director, Dutch Surrealist Plumbing Institute.
(Known to some as Bruce Lane, ARS KC7GR,
kyrrin (a/t) bluefeathertech[d=o=t]calm -- www.bluefeathertech.com
"If Salvador Dali had owned a computer, would it have been equipped
with surreal ports?" |
|
| Back to top |
|
|
Watson A.Name - \"Watt Su
Guest
|
| Posted:
Sun May 15, 2005 8:35 am Post subject:
Re: how can I cause static on a phone line? |
|
|
"teletech" <data@engineer.com> wrote in message
news:1115855539.326733.21590@g14g2000cwa.googlegroups.com...
If you actually _believe_ what those phone phreaking 'manuals' tell you,
then you're a poor excuse for a 'teletech'. |
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in