Theo v. Werkhoven
Guest
|
 Posted:
Thu Apr 28, 2005 2:53 pm Post subject:
HP8116A lost its output. |
|
|
Hi,
we have a 8116A that has lost (most of) the output signal since a
couple of months. Agilent doesn't repair these oldies anymore, so I'm
trying to find out if there's a chance to solve the problem by myself.
The signal is not completely gone, with a scoop set to 10mV/div I can
still see a ~20mV signal, with the correct frequency & waveform, but
neither the 'disable' button or increasing the signal strength have any
effect, so my guess is it's either the Output Disable function or a
driver circuit.
The TRIG OUTPUT signal is Ok btw.
With a schematic I could probably find out where the problem lies, but
a search brought no solution there, so my question is: has anyone seen
this before, and does he or she know where I could look inside the
instrument (or better yet, what part it could be)?
Thanks for all answers.
Theo
--
Satellite Services B.V.
Netherlands
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in