JURB6006
Guest
|
 Posted:
Sat Feb 05, 2005 7:06 am Post subject:
Re: project: connect stereo audio out to monitor deflection |
|
|
You'll need a spare yoke and stepup transformers to match impedance. Set the
original yoke aside still hooked up and put the spare on the tube. To use a
computer monitor you may need to have an old PC just to get it to turn on.
In fact, to set the purity you'll need to feed the monitor all one color from a
PC, then you can interrupt the video signal and start playing around with that
too, use a low value cap fo example to feed the high frequencies to modulate
the beams.
(yes, as you suspect I have done it, on an old 21" round color TV)
Have fun.
JURB
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in