d
Guest
|
 Posted:
Mon May 16, 2005 4:35 pm Post subject:
Re: Galaxy 8 bell box connections |
|
|
"PeterCB" <no.mail@please> wrote in message
news:dJvge.1589$RJ6.18@newsfe1-win.ntli.net...
| Quote: |
Put your strobe trigger wire in with your bell trigger
wire. That way, your strobe will not continue after
the bell has stopped sounding.
The reason for this is;
eg/ You go away for a couple of days and the first day,
your alarm goes off. Your strobe will continue until you
get back!
People will see that strobe going off for days and realise
that no-one is home - and break in! This is why now,
all the major companies do this.
|
Hi Peter, that makes a lot of sense.
Just out of interest, I did get the strobe working separately but I had to
put the strobe wire into the PA output and then reassign the PA output to
strobe in the engineers menu but I will now go back to the control panel and
put the stobe in with the bell as you suggest.
Thanks a ton for all your help
Cheers
Dave
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in