Matt Nottingham
Guest
|
 Posted:
Sun Jan 30, 2005 5:05 pm Post subject:
S7150 DMM flashing "ERR" & "CAL" symbols |
|
|
Hi,
I have a S7150 DMM which I'm controlling by GPIB from Linux.
Before I had a list of commands, I was trying various combinations
to see what would happen. I've somehow managed to get it in a state
that the ERR & CAL symbols constantly flash on & off. I've tried
power cycling it, sending it "A" & "C0" commands and everything
else in the manual, but with no luck.
Any suggestions?
(Yeah, I know its my own fault.....)
Thanks,
Matt Nottingham
|
|
Matt Nottingham
Guest
|
| Posted:
Sun Jan 30, 2005 6:17 pm Post subject:
Re: S7150 DMM flashing "ERR" & "CAL" symbols |
|
|
On Sun, 30 Jan 2005 11:05:32 +0000, Matt Nottingham wrote:
| Quote: |
Hi,
I have a S7150 DMM which I'm controlling by GPIB from Linux.
Before I had a list of commands, I was trying various combinations
to see what would happen. I've somehow managed to get it in a state
that the ERR & CAL symbols constantly flash on & off. I've tried
power cycling it, sending it "A" & "C0" commands and everything
else in the manual, but with no luck.
Any suggestions?
(Yeah, I know its my own fault.....)
Thanks,
Matt Nottingham
|
I forgot to mention that apart from the flashing symbols, the
device seems to work quite happily.
Matt |
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in