Electronics

ghost · Joined: 02 Sep 2006 Posts: 3 Location: tx

I have looked everywhere to find the specification for these two capacitors please please help me!
I am trying to fix a digital camera that I let a friend barrow and he charged it with the wrong polarity, it fried two of the caps.
I need to fix it really bad because I barrowed it from my brother and I have to give it back soon!!!!

The capacitors are as follows
They are both black with a white stripe on the left side and they have 100 above 6Y on one and 100 above 6Z on the other. If you can please help I would really appreciate it. Thanks

Here is a pic

neon · Joined: 25 Feb 2006 Posts: 570

It is a 100 micro farad at 6 v dc. ask fo it for replacement in any electronic source. The stripe tell you where the negative terminal or minus is. Replace them exactly as removed or measure the voltage.You should consider yourself lucky if that will fix your camera but it is a start I am surprised that there is no protection for polarity reversal a diode in series would have prevented this disaster.

	Electronics Forum Index -> Repair	All times are GMT
Page 1 of 1