Need help driving two IPS1031 Low-Side MOSFETs from a PIC
Electronics Forum Index Electronics
Circuits, theory, electrons and discussions.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web ElectronicsHelp.net
Need help driving two IPS1031 Low-Side MOSFETs from a PIC

 
Post new topic   Reply to topic    Electronics Forum Index -> Design
Author Message
JedOs



Joined: 11 Aug 2006
Posts: 2

Posted: Fri Aug 11, 2006 11:22 pm    Post subject: Need help driving two IPS1031 Low-Side MOSFETs from a PIC Reply with quote

The IPS1031 is a Low-Side MOSFET Driver that drives its own MOSFET. I am planning on incorporating it into my design, but most of its spec sheet is total gibberish to me.
I am driving two of them off of a single PIC output which can sink 3.7-5V @ 25mA.
The IPS1031 datasheet: http://www.irf.com/product-info/datasheets/data/ips1031.pdf

Attached is a schem I used for its simulations purposes. Through the use of "OR" diodes, only two IPS1031s are on at any single time; Q2 is saturated when either Q1 or Q3 is saturated. S1 and S2 signafy two different PIC Outputs.



Back to top
View user's profile Send private message AIM Address
JedOs



Joined: 11 Aug 2006
Posts: 2

Posted: Sat Aug 12, 2006 2:39 am    Post subject: forgot the actual question. Reply with quote

LMAO, I forgot to mention what it was that I needed help on. I was concerned about the required voltage to turn on the mosfet, and if in combination with the diode and the pic output, if it would even see this voltage.
Back to top
View user's profile Send private message AIM Address
 
Post new topic   Reply to topic    Electronics Forum Index -> Design All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Home & Living New Topics
Powered by phpBB