Panasonic CT32SX31 Width Problem Now
Electronics Forum Index Electronics
Circuits, theory, electrons and discussions.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web ElectronicsHelp.net
Panasonic CT32SX31 Width Problem Now

 
Post new topic   Reply to topic    Electronics Forum Index -> Repair
Author Message
Johnace
Guest
Posted: Mon Dec 12, 2005 1:24 am    Post subject: Panasonic CT32SX31 Width Problem Now Reply with quote
I posted a problem on this TV about a power problem. I replaced the
pincushion parts but that was mot the problem. I found Pin 29 on the
Jungle IC (IC101)had a 100 ohm to ground killing my SCL and SDA down. I
put in a new IC and that corrected the problem, but now I have a width
for shifting problem. I get about 2 inches from the left ( all black)
and the picture on the right is off the screen. I checked the voltages
and they are normal. I went into the service menu and cannot correct it
there. Almost like a HV cap in the flyback area has changed value. Any
help out there ? Thanks

Back to top
Johnace
Guest
Posted: Mon Dec 12, 2005 1:35 am    Post subject: Re: Panasonic CT32SX31 Width Problem Now Reply with quote
Looked there already and found no solution yet. The parts that are
listed were checked or replaced. Thanks
Back to top
Sky
Guest
Posted: Mon Dec 12, 2005 1:35 am    Post subject: Re: Panasonic CT32SX31 Width Problem Now Reply with quote
ave a look here, just scroll through these files. Sky.

http://wa6ati.com/pan-new.html

Back to top
 
Post new topic   Reply to topic    Electronics Forum Index -> Repair All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Home & Living New Topics
Powered by phpBB